Weather protection
Siding in St. George, KS
What new siding costs, and which material holds up longest where you live.
- Cost data tuned to your area
- See the numbers with no sales call
- Refreshed for 2026 rules & rebates
Typical siding replacement in St. George
$6,300–$11,000
Most pay around $8,700 · Vinyl · 1,800 sq ft
80%Recouped at resale
≈ $7,000 added value
Find top-rated siding prosSponsored. We may earn a commission from this affiliate link, which helps run coconest.
Cost per unit
$3.48–$6.09
per sq ft installed
Most popular here
Vinyl
~48% of U.S. installs
Typical timeline
5–10 days
Start to finish
Typical lifespan
20–40 yrs
Vinyl
Cost estimator
Estimate your siding replacement
Adjust the inputs to match your home. Figures blend national pricing with St. George's local cost index. They're guidance ranges, not quotes.
Build your estimate
Tuned to St. George labor and material pricing. Adjust to match your project.
1,800 sq ft
800 sq ftMost homes: 1,500–2,5004,000 sq ft
The value default: low-maintenance, freeze-tolerant, widely installed.
Estimated total
$6,300–$11,000
$3.48–$6.09 per sq ft installed
BudgetPremium
- Expected lifespan
- 20–40 yrs
- Midpoint estimate
- $8,700
Planning estimate, not a quote, your actual price varies by contractor, materials, and scope.
Material
What each option costs
Adjusted for St. George. Premium choices cost more up front but often last longer or perform better.
Vinyl$6,300–$11,000
Fiber cement$9,400–$21,900
Engineered wood$7,800–$14,100
Steel / metal$11,000–$20,400
Most popular here
Vinyl
~48% of U.S. installs
Longest lasting
Steel / metal
40–60 years
Resale payback
80%recouped
New siding is one of the strongest exterior upgrades for resale, typically recouping a large share of its cost while protecting the structure and cutting drafts.
Spot a fair quote in St. George
A typical siding replacement here runs $6,300–$11,000. Get the tear-off, house-wrap, and trim spelled out line by line. Suspiciously low bids often reuse old wrap or skip flashing details.
- Confirm full tear-off and a new weather-resistant barrier.
- Ask how sheathing rot found mid-job is priced before you sign.
- Get the material and workmanship warranties in writing.
What changes your price
- Material choice. Vinyl vs fiber cement vs engineered wood vs steel sets the base cost per square foot.
- Wall area & stories. Total square footage and second-story height drive labor and staging.
- Tear-off & repairs. Removing old siding and fixing sheathing rot or wraps adds cost found mid-job.
- Trim, corners & details. Soffit, fascia, corner posts, and complex rooflines add material and labor.
Seasonal pricing
When siding replacement costs the least in St. George
Demand and weather move installer pricing through the year. These are modeled trends for St. George; the actual timing and savings vary.
Price vs the yearly average
Cheaper Pricier
Best time to buy
December
About 4% below average · ≈ $350 less on a typical job
Peak demand
June
About 6% above average · ≈ $500 more on a typical job
Find top-rated siding prosSponsored. We may earn a commission from this affiliate link, which helps run coconest.
Why it matters
Why it pays to do it right
Your home's weather shell
Siding plus a good moisture barrier keeps wind-driven rain and snowmelt out of the wall cavity, where damage hides until it's expensive.
Freeze-thaw is the enemy
Repeated freezing and thawing cracks brittle or aging siding and lets water in. Modern materials are built to flex and shed water.
Insulation opportunity
A re-side is the rare chance to add a layer of continuous insulation behind the cladding, trimming heating bills for decades.
Curb appeal & resale
New siding transforms the look of a home and consistently ranks among the top exterior projects for recouped value.
Local conditions
Siding in Manhattan
Siding in St. George has to survive a punishing mix: high hail risk, persistent wind-driven rain, temperature swings from -5°F to 103°F, and summer humidity that tests every seam and fastener. Fiber cement and engineered wood outperform economy vinyl across all these stresses and hold their finish through the wide temperature swings that chalk and crack lower-grade products.
Hail & wind risk
High
Riley and Pottawatomie counties see frequent large-hail events and high straight-line wind speeds; impact-rated fiber cement or steel cladding is the most cost-effective long-term choice.
Temperature swing
-5°F to 103°F
The 100-plus-degree seasonal range expands and contracts every joint and fastener; fiber cement and steel tolerate these swings far better than economy vinyl.
Wind-driven rain
Persistent
The steady Kansas wind drives rain horizontally into any gap; proper flashing, housewrap, and fastening patterns are as important as material choice.
Durability & storm resistance
High hail risk is the defining siding challenge in Manhattan. Impact-rated fiber cement and engineered wood products resist hail strikes, handle wide temperature swings without warping, and hold factory finishes longer than economy vinyl, which chalks and embrittles under the Kansas sun and cold. A re-side is also the ideal time to add continuous insulation behind the cladding, reducing the infiltration losses that the relentless Kansas wind drives.
Permits
A full re-side in St. George typically requires a permit and inspection; a licensed contractor pulls it for you.
FAQ
Siding questions, answered for St. George
What siding holds up best in St. George's climate?
Fiber cement is the top performer in the Kansas plains: it resists hail impact, handles wide temperature swings without warping, and holds factory finishes far longer than economy vinyl. Steel and engineered wood are strong alternatives.
Can new siding reduce my energy bills in St. George?
Yes. Adding continuous rigid insulation behind new cladding reduces infiltration losses from St. George's persistent wind and cuts both heating and cooling bills, often by 10-20% for older homes with minimal wall insulation.
Do I need a permit to reside my home in St. George?
A full re-side typically requires a permit and inspection in St. George. A licensed contractor pulls it and folds the fee into the project quote.
Will my insurance cover hail-damaged siding in Manhattan?
Most standard homeowners policies cover sudden hail damage. After a significant storm, have a licensed contractor document the damage before filing a claim, since adjusters typically follow the contractor's inspection findings.
Guides
Siding guides & buyer tips
Go deeper on costs, materials, and how to choose, then price it for your home above.
Comparison
Siding materials compared: vinyl, fiber cement, engineered wood, and steel
How the main siding materials compare on installed cost, lifespan, and durability, and which holds up best to wind, water, and freeze-thaw where you live.
Read guideCost guideWhat new siding costs and what drives the price
Siding cost by material and wall area, the factors that move a quote, and how to read a re-side bid so the tear-off and weather barrier aren't quietly skipped.
Read guidePlanningSigns you need new siding
How to tell failing siding from a cosmetic issue: warping, rot, soft spots, peeling interior paint, and rising energy bills, and when a repair will do instead.
Read guideComparisonBest siding for wet and freeze-thaw climates
Which siding survives wind-driven rain, freeze-thaw, heat, and wildfire. How vinyl, fiber cement, engineered wood, and steel hold up by climate, and which to avoid where.
Read guidePlanningHow long siding lasts, and how to keep it that way
How long vinyl, fiber cement, engineered wood, and steel siding last, plus the washing, sealing, and repainting that helps each reach the top of its range.
Read guideHow we estimate: ranges combine national pricing with St. George's local cost index and the options you choose. They're modeled for planning and may differ from contractor quotes. Always get an on-site assessment before you commit.
Pricing modeled for 2026Sources & method